ROAD AND COMMUTER BIKE SERVICES

We generally don't charge call-out fees..

..however, we do require a minimum spend on labor to make a booking, depending on your area. The minimum for most of Melbourne is $130 (same as General Service). Smaller jobs may present a call-out fee. Please call for a quote. All pricing includes GST.

Spare parts

Replacement of normal wearing parts (chain, cassette, chainrings, and brake pads) does not incur an additional labor charge for their fitting when carrying out a General Service. All work will be carried out following your approval.

We keep it clean and easy

All work is carried out at our service vans on the street or your driveway, not in your lounge room. We leave no trace and require no water or electricity to operate. Rainy days- no problem.

Payments

We accept Visa, Mastercard, PayPal, bank deposit, and cash.

Group Discounts

Good discounts are available for servicing three or more bikes at a time. See if you can get some friends and colleagues together at work and have a corporate service day.

- Check drive-train for wear

- Chain and chain-rings degreased on-bike.

- Cassettes are cleaned in our parts washer

- Replace gear and brake cables as necessary (new cables $5)

- Derailleur hanger alignment

- Gears adjusted to run smoothly

- Lubricate chain, cables, derailleur's and brake pivots

- Brakes adjusted for maximum power and feel

- Disc rotors checked for wear & alignment

- Check brake pads for wear, replace if necessary

- Check and adjust headset

- Check and adjust bottom bracket

- Tires checked for cracks, holes, wear, then inflated

- Tighten all bolts to correct torque

- Road test.

The "Go-To" service

General Service (60-90 mins)

Recommended every 6-12 months, or every 3-6 months if ridden multiple days per week. Also a great option before long bike tours, or after muddy rides.

This ensures your bike lasts for as long as it should: smooth, clean, quiet, and safe.

130

Contains everything from the General Service, plus:

- Cassette and chainrings/cranks removed and degreased in detail with our powered parts washer

- Remove bottom bracket bearings, flush with new grease

- Full headset bearing service, forks are removed

- Minor wheel true (on-bike)

Optional: Add F+R wheel bearing and freehub overhaul for $60

Pro Service (1.5-2.5 hours)

Recommended for road bikes every 12 months. A great option to take extra care for bikes that get ridden through harsh conditions like mud or water. Extra time is spent on the wheelset health, as well as opening and cleaning areas where earth and water can pool, or grease can dry up.

$190

- Visual inspection of frame and forks

- Check drive-train wear

- All drivetrain parts are cleaned and degreased on the bike.

- Free fitting on replacement drivetrain parts when combined with this service

- Check and replace brake cables as necessary (new cables $5)

- Lubricate chain, cables, and brake pivots

- Brakes adjusted for maximum power and feel

- Disc rotors checked for wear and alignment

- Check brake pads for wear and replace if necessary

- Check headset for play and adjust

- Check for play in bottom bracket and adjust (from the outside)

- Tires checked for cracks, holes, wear, and then inflated

- Minor wheel true on-bike if required

- Tighten all bolts to correct torque

- Road test

$110

Singlespeed Service (45-60 mins)

For adult bikes with a single gear only, front and rear

Recommended every 8-12 months, or every 4-6 months if ridden multiple days per week. Also a great option before long bike tours, or after muddy rides.

This ensures your bike lasts for as long as it should: smooth, clean, quiet, and safe.

Full Strip and Service (3.5-4.5 hours)

Recommended every 2 years. Every part of the bike gets a working over. All cables are replaced, resetting the brake and gear feel to new. Dirt and old grease are flushed out of the frame so they don't pool up and rust. All bearings are re-packed with fresh grease for the longevity of components.