top of page

ROAD AND COMMUTER BIKE SERVICES

Minimum spend and call-out fees

The minimum labor charge is $130 inc GST. We travel anywhere in metro Melbourne. The first 10km from Richmond, Surrey Hills, and Oakleigh are free, and additional distance is charged at $4 per km in one direction. Small/quick jobs within the areas above still require a call-out fee, usually $40-50 on top of job cost (things like punctured tubes, broken chain, quick quotes on-site).

Spare parts

Spare parts for the common jobs on most bikes are carried on board, such as cables, pads, chains, cassettes, chainrings, tires, tubes, bar tape, grips, and so on. All work and replacement parts will be carried out following your approval.

 

We keep it clean and easy

All work is carried out in our service vans on the street or your driveway, not in your lounge room. We leave no trace and require no water or electricity to operate. Rainy days are no problem.

 

Payments

We accept Visa, Mastercard, PayPal, bank deposit, and cash.

 

Group Discounts

Good discounts are available for servicing three or more bikes at a time. See if you can get some friends and colleagues together at work and have a corporate service day.

- Check drive-train for wear

- Chain and chain-rings degreased on-bike.

- Cassettes are cleaned in our parts washer

- Replace gear and brake cables as necessary (new cables $5)

- Derailleur hanger alignment

- Gears adjusted to run smoothly

- Lubricate chain, cables, derailleur's and brake pivots

- Brakes adjusted for maximum power and feel

- Disc rotors checked for wear & alignment

- Check brake pads for wear, replace if necessary

- Check and adjust headset

- Check and adjust bottom bracket

- Tires checked for cracks, holes, wear, then inflated

- Tighten all bolts to correct torque

- Road test.

The "Go-To" service

General Service (60-90 mins)

 

Recommended every 6-12 months, or every 3-6 months if ridden multiple days per week. Also a great option before long bike tours, or after muddy rides.

This ensures your bike lasts for as long as it should: smooth, clean, quiet, and safe.

130

Most Popular

Contains everything from the General Service, plus:

 

- Cassette and chainrings/cranks removed and degreased in detail with our powered parts washer

- Remove bottom bracket bearings, flush with new grease

- Full headset bearing service, forks are removed

- Minor wheel true (on-bike)

 

Optional: Add F+R wheel bearing and freehub overhaul for $70

Pro Service (1.5-2.5 hours)

 

Recommended for road bikes every 12 months. A great option to take extra care for bikes that get ridden through harsh conditions like mud or water. Extra time is spent on the wheelset health, as well as opening and cleaning areas where earth and water can pool, or grease can dry up.

$200

- Visual inspection of frame and forks

- Check drive-train wear

- All drivetrain parts are cleaned and degreased on the bike.

- Check and replace brake cables as necessary (new cables $5)

- Lubricate chain, cables, and brake pivots

- Brakes adjusted for maximum power and feel

- Disc rotors checked for wear and alignment

- Check brake pads for wear and replace if necessary

- Check headset for play and adjust

- Check for play in bottom bracket and adjust (from the outside)

- Tires checked for cracks, holes, wear, and then inflated

- Minor wheel true on-bike if required

- Tighten all bolts to correct torque

- Road test

Please note, minimum labor for any booking is $130

$110

Singlespeed Service (45-60 mins) 
For adult bikes with a single gear only, front and rear
 

Recommended every 8-12 months, or every 4-6 months if ridden multiple days per week. Also a great option before long bike tours, or after muddy rides.

This ensures your bike lasts for as long as it should: smooth, clean, quiet, and safe.

Full Strip and Service (3.5-4.5 hours)

 

Recommended every 2 years of frequent riding. Every part of the bike gets a working over. All cables are replaced, resetting the brake and gear feel to new. Dirt and old grease are flushed out of the frame so they don't pool up and rust. All bearings are re-packed with fresh grease for the longevity of components.

$440  standard road bikes
$500  Bikes with hydro brakes & tubeless tires

Contains everything from the Pro Service, plus:

- F+R wheel bearing and freehub overhaul

- Full wheel truing included

- Hydraulic disc brakes bled if required

- All inner and outer cables are replaced on the bike without further charge. New bar tape may be necessary

- All components cleaned in immaculate detail

- Brake rotors are straightened, and brake pads are changed if needed ($30+ per end for disc brake pads)

- Tubeless tires; clean up and check sealant level

- High detail look for frame dents, cracks or other damage

Please note, the service price is flexible. Some items of service can be subtracted from total if unwanted.

Visit our specialty section

Not every service option is listed here so please call or email to discuss your needs.

IMG_20220323_171747.jpg
bottom of page